Walking anywhere in uncomfortable shoes is a huge pain in the neck Yet, working in bad shoes is even worse. That’s why, we’ve decided to create this article about best work boots. If you are constantly on your feet when working, you must have very top work boots. Our goal is to make sure your feet are comfortable!
A long-time favorite of those who put miles on their footwear, they are well known for their comfort and hard-wearing durability. Made of full grain leather, these 8” full shank boots start by using the highest quality materials.
With an impact-ready rubber sole and dual-density EVA midsole, they are designed for work on the harshest surfaces. Combined with a cushioned footbed, these take the pain out of long hours on your feet. Vibram has become one of those miracle materials for footwear. They soften impact and improve the grip of this already aggressive outsole. Treated to be slip and oil resistant, these meet the standards of most worksites. With a fully waterproof exterior and breathable Gore-Tex liner, these keep your feet dry. Sweat and any other moisture you may encounter is no issue. Not too hot for the summer but with just that right amount of insulation for cooler temps, these are a solid, year-round boot. With a non-metal safety toe, these are great work boots for the roughest worksites.
The Vicious even have a little extra room separating your toes from the hardened toecap just for added comfort and safety.
This is one of those small features you won’t appreciate until you try it. Work boots made to be tough on the outside and the ultimate in comfort on the inside, these are a top-notch choice in a flooded market.
Thorogood has been making work boots for over 200 years. Most of those have been a classic 6” boot that was the standard in the U.S. for generations. They provide the best support with a low weight, low drag body for long days or long treks. But don’t worry. Not everything about these boots is old technology. Those comfort enhancing soles use a single density rubber that is the hardest wearing design possible.
The same is true of the shock-absorbing footbed that uses a soft but supported Poron cushion. Like any good boot, these Thorogoods are completely slip resistant. These are made of an oil-tanned leather for natural waterproofing. The internal lining is a cotton drill that is treated to resist and wick moisture. It shouldn’t be surprising that these are a light boot for warmer weather and not great for year-round wear. For those hot days, the poly sole will protect your feet while the light liner will keep your feet dry. Even the insole is designed to keep moisture off your feet for all-day wear.
With a full-length composite shank capped with a durable rubber midsole, these soft-toe boots are made to last. All the while bringing a little class back to the workplace. They look, good, wear well, and are amazingly comfortable.
If there were one group of people that put more wear on a pair of boots than workmen, it would be hikers. These people abuse their footwear in some amazingly bad conditions. So, what would happen if a dedicated hiking boot company set about making a pair of work boots? You would get one of the most comfortable work boots on the planet that is hard wearing on the outside but like walking on a cloud on the inside. A part of the Keen mentality is to provide footwear that does all the hard jobs without any of that roughness on the inside.
This is thanks to their ‘metatomical’ food bed design that literally cradles the foot in the contoured EVA footbed. This, added to the support of a 7” shaft and thick sole that provides all the support you could need, makes for one amazing boot. With a moisture-wicking internal membrane to keep your feet dry and provide airflow, these boots work in hot conditions. Yet, they are capable of serving you well in three seasons, four with good socks.They have plenty of grip from an aggressive outsole that is oil and slip resistant on anything but ice.
The Milwaukee utility boots have a steel toe and have some definite weight to them but are still much lighter than many comparable boots. That hiker mentality of hard wearing and ultimate comfort really pays off with Keen Utility boots.
In today’s flooded boot industry, some older classics just don’t get the notice they deserve. Take Georgia Boots for example. They have made some of the best quality work footwear on the planet for years but constantly seem overshadowed. These beefy 11” Wellington style boots are made of a mix of thick full grain leather and flexible split suede. This gives them rigidity and support where they need it and a little give for extra mobility. The Athens boot may take a little more care to preserve but nothing you shouldn’t be doing anyway.
Made with a durable rubber outsole for plenty of grip and a full-length shank for added support, these pull-on boots are good in any environment. They lack any specific insulation, making them a three-season boot unless you have some very warm socks. The AMP foam footbed provides plenty of cushion that melds to your foot while the EVA midsole takes all the shock out of walking on concrete all day. The sole is plenty thick to keep the heat out on hot days and the cold out when it gets chilly. If you are looking for a boot that will serve you well while you work but not look out of place on a Friday night, the Athens boots are just what you need.
With a moc-toe and great styling, these are one of the most handsome work boots around. But they are far from just another pretty face. Every part is stitched and cemented for the ultimate strength in construction. The structural pieces like the oil and slip resistant sole are double stitched to make sure they aren’t going anywhere. Georgia has done a rugged boot the right way.
The true mark of Irish Setter boots is their classic styling with modern materials. It is a perfect blend of functional design with all the features of a modern boot. This has made them one of the best-selling boots for the last decade. With a full leather body that is double stitched for strength, these boots are no joke when it comes to hard work. As a matter of fact, that is their sole purpose for existing.Everything about these boots has the worker’s comfort and safety in mind. The composite sole provides plenty of rebound on your step to cushion your knees while the EVA traction tread keeps your footing solid and sure.
These boots meets ASTM requirements for electrical safety and resist heat up to 475 F for those extra-harsh environments. The contoured heel and sizable toe-box combined with a molded poly footbed keep your feet secure. They even have plenty of room for an extra insole if you want a little extra comfort. At the top of these 6” boots is a padded throat with a little extra in the back to prevent rubbing. The non-woven polyester lining wicks moisture and provides a smooth surface to prevents blisters. These boots were designed for all-day wear.
If you are a roofer, factory worker, or anyone else who needs to be on their feet in harsh weather, these boots are a great choice. Using only leather raised in the U.S. specifically for their footwear, Irish Setter has made this style of boot for more than 60 years. They have combined multiple lifetimes of experience in boot making to produce a solid, comfortable boot that can take the abuse.
Over the last 30 years, Wolverine has built a reputation for hard wearing boots for the discerning workman. They combine an array of comfort features with some of the most durable construction methods in the industry. In the end, the boots they produce are hard to beat. Made of a thick full-hide leather, double stitched and reinforced at all the critical points, these are boots built to take a beating. Both glued and stitched to a full EVA rubber outsole, there are no compromises. The lugged outsole itself is made to provide traction on any surface and are oil and slip resistant. The external surface is abrasion resistant while the core provides the cushion. Combined with a patented multishox insole, this makes for a comfortable boot all day.
With a mesh liner for good airflow, these boots do a good job at keeping your feet dry and sweat free for those long days. They resist moisture well but aren’t waterproof to the degree of some boots. This helps them breath better but can be a hindrance in wet climates. The added padding around the rear of the throat and comfort formed welt, these are a surprisingly comfortable boot.
The Raiders may not the lightest on the market but they were made for durability not speed. These boots excel in hard work environments where you can’t compromise on craftsmanship. If you work hard, these are the boots that can keep up!
It is hard to talk about work wear and not end up on Carhartt eventually. They have been an industry leader for decades and still make some of the best products on the market. Any job site you visit, you are guaranteed to see something made by Carhartt. In the case of these composite toe work boots, they are just as tough as anything else Carhartt has ever made. Made from full-grain, oil-tanned leather, they are durable and naturally water resistant. Even the stitching is designed for maximum strength with double and triple rows at the stress points. Inside, the ventilated liner provides maximum airflow.
All the while the OrthiLite insole cushions every step. The cushioned tongue and collar support the ankle and prevents hot spots. Everything about the inside of this boot speaks to those who spend hours on their feet. The outsole is designed to cushion those impacts even more on any surface. They grip well and are oil, chemical, and slip resistant on any surface. From the field to the job site, these are boots that pamper while staying tough enough for harsh conditions. With a full shank and composite toe, these meet with the most strenuous workplace requirements and are ASTM compliant. No matter where you go, these boots are designed to help you get the job done right. With a rugged flex technology, they bend where they should while supporting where it’s needed.
Carhartts are legendary and these boots are no exception. Wherever you need them, these are boots that will treat you right and be with you until the job is done. If you are looking for top work boots to use daily, you can’t go wrong with this pair.
The initial foray into work boots by famed company Caterpillar was met with some skepticism. How could a heavy machinery company gain a foothold in such a complex market with so many high-quality products already available? Well, they pulled it off and did so with some amazing products that are worthy of a little attention. Like their line of machinery, these boots are a quality second to none and tough as the day is long. No matter where you are working today, these full leather steel-toe boots are ready to go with you.
With a Thinsulate lining, done right these boots could get you through all four seasons without issue. They may be a little warm for summer wear but the moisture wicking liner keeps your feet dry no matter the temperature outside. With a full shank, extra-padded throat, and reinforced instep, Caterpillars provide you with all the support you could need. Combined with an EVA lugged outsole for traction in the rough, your feet should stay planted and your footing sure. Fully waterproofed, oil-tanned leather keeps out any moisture and keeps your feet dry in the wettest conditions. All the while, the ergonomic fit keeps you stepping true. No matter where you work or what your job is, these boots can get it done.
Approved for all hazardous conditions, these stand up as well as you would expect from the Caterpillar name. Don’t compromise when it comes to your feet, Caterpillar didn’t with their boots.
In the early days of Wolverine’s production, they specialized in a wellington boot that became famous. It was famous for the comfort and durability it offered. There were few boots tougher and no wellington that wore as well. This classic boot is back but with all the modern convenience. Like those classic boots, this boot is made of thick 100% Nubuck leather. Nothing lasts as well and stays as strong. With a little care, your feet will break down before these boots do. Their construction makes them naturally resistant to water and a little oil will complete the job. With welted seams and a Goodyear welted sole, there is little space for water to penetrate to begin with.
This ensures a dry foot when the conditions get tough. And that’s what these boots were made for, the harsh stuff. The old model was a staple on the farm and these can be too. With a modern nylon shank, the overall weight has been reduced but the durability is still there. This combined with an EVA molded footbed and fitted heel provide solid support for those jobs that keep you moving. Just because you aren’t a farmer doesn’t mean these boots are out.
The slip-resistant sole keeps you safe no matter the surface and the optional steel toe meets most industry standards. No matter the job, boots of this style were the standard for decades. With no lining, these could be thought of as a warm weather boot but the sizable fit allows you to really layer up for cold weather. It may not be the best for the frigid north but you can pull three seasons out of this boot without issue.
When it comes to classic wellies, Muck is the king. Worn by those people who work in conditions that really suck, these boots are made to get you through when no other boot will do. On those days it’s just too much for your leather footwear, these are the one boot that will keep you working. Generally, the first reaction to Muck boots is that they look uncomfortable. Nothing could be farther from the truth.
These are an amazingly comfortable boot that has kept people’s feet toasty in the coldest and wettest environments for years. The 5mm waterproofed neoprene combined with a full rubber sole and foot box molds easily around your feet. No matter how you move, the boot goes with you. This prevents any rubbing, chaffing, and blisters. Support may be a little lacking but when it’s cold, your toes won’t be. Made to be worn down into sub-freezing temperatures even if you are cracking ice to work, you should have little worry with a pair of Mucks. Cold mud, deep snow, nothing makes it in these boots. With some warm socks, you are ready to go all day.
With an Airmesh lining, even sweat gets wicked away to keep you working dry. Air goes out, nothing gets in. The whole time, these boots are insulated by their body material. This makes them easy to wear and easy to clean. With a full steel shank and slip resistant outsole, these boots provide solid footing. They are truly a marvel of modern materials. If your forefathers had had these, they would have worn them in a heartbeat.
Timberland is one of those companies that has become synonymous with quality footwear. They may lack the pedigree of some of the older brands but new doesn’t make them inferior. Their boots are well known for structure and support in the most demanding fields. The premium, waterproofed leather used by Timberland is first in its class at resisting moisture and staying strong. Even the seams are sealed for that added barrier if the conditions get a little rough. Everything is double and triple stitched to keep it all together no matter the abuse it takes.
The solid outsole is lugged to provide traction in every direction to prevent slipping, however, your foot is placed. These are boots designed for the outdoors but provide all the comfort of a contemporary work boot. On the inside, the Timberlands are just as good.
With a compression molded EVA insole that wraps the foot in secure comfort, no amount of walking is going to put you off your step. With a full-length shank and cushioned, shock absorbing insole your feet step easily and plant firmly. With a gusseted tongue and full collar, you get all-around comfort and a barrier to keep any debris out of this two-season boot. Best left at home in the real cold but perfectly comfortable and dry on those warmer days, these Flume boots are a great mix of style and substance.
If the Timberlands are kind of your thing but you need just a little more, you could easily graduate to the Pit Boss. These offer the maximum of comfort and durability. They are a no-compromise boot made for the toughest and hardest work environments. The Pit Boss is a true professional grade boot made of nubuck leather making them a boot that looks great and is built like a tank. These are boots that talk the talk and walk the walk. Wherever your work takes you, these boots will keep you going. Pit Boss boots offer all the extras like triple stitching and an extra padded tongue and collar. Everything has been done to this boot to make it work while keeping you comfortable. Even the midsole is designed to take all the impact out of your steps without breaking down that first year like cheaper boots.
The molded rubber outsole is not only slip resistant, oil resistant and durable. It has been formulated to be even more resistant than any other boot. Once your foot is planted it stays and with a full steel shank, you have all the footbed support for really planting your feet. Even with a steel toe, each boot only weighs a pound and a half so you avoid the fatigue of dragging your feet around all day. This does nothing to compromise the integrity of this boot that says rock solid no matter the weight.
For three season wear, this is a good, breathable boot that will keep you dry in most conditions and safe in all conditions. There is little doubt about Timberlands quality, these are proof!
Finally, a boot made for those people on second shift, you know the ones that get all the crap that is left over when those early guys bail. If you are one of those stuck with the real job of making sure the day’s work is done, you need a boot that will stand there with you. Fully welted and double stitched full-grain nubuck leather makes up the body of this sturdy boot. A little light treatment may be needed to seal out the wet if you work in the real crud. Otherwise, these are perfectly designed to keep you going.
With the addition of a steel toe and a full steel shank, these are the ultimate of safety. Included with this are an oil resistant, high traction outsole, and an extra supportive padded collar. If there is one place you want no compromises, it is safety. But why compromise anywhere? Caterpillar didn’t with these boots that feature all the comfort you will need for a long shift.
The Climasphere insoles do exactly what you would think they do. Provide a cool dry bed that is second to none in comfort. Your feet stay dry and supported all day, or all evening if you are a second-shift guy. No matter what time you work, these safety-rated boots have everything you should need. Comfort, toughness, and security for that all important part of your body. For their current price, this top work boot pair is definitely worth every penny.
I am sure it’s as hard for you as it was for me to imagine work boots made by a company known mostly for skateboard shoes. Once you get past that initial impression, these are quite a high quality work boot as long as you aren’t working in the real rough jobs. Made of suede leather, they would normally lack the waterproofing of oil-tanned but a light treatment has taken care of that. The body of these boots is triple stitched where it counts and double stitched most everywhere else. The end result is quite a solid boot. Where it really excels is in all-day comfort. With a smooth lining, extra padding, and an amazing cushion insole, these boots are amazing on your feet.
They are light and shock absorbing with just the right amount of bounce for those long days on your feet. They do lack in the normal safety features and ratings. These are more for those jobs where you have solid footing. The sole is thick and protected with a full shank but otherwise, you are on your own. That said, if you are looking for a pair of light duty boots the Sketchers are quite a bargain. They are very comfortable and capable of lasting years with the right care. If you are looking more for style, these are definitely a boot to consider.
“Diabetic foot ulceration is a preventable long-term complication of diabetes. A multicenter prospective follow-up study was conducted to determine which risk factors in foot screening have a high association with the development of foot ulceration.”
Sometimes what you need is a boot on a budget. The big names and great brands are fine and all but sometimes money is tight. If this is you, you may not get the best but you should demand a decent quality boot for your hard earned money. Enter the Ever Boot. From the look and feel of these boots, it would be hard to tell what was different between them and a boot costing twice the price. There are differences but it’s mostly in the details. Made of the same full grain leather with triple stitched seams these are a very solid boot. They even have the same Goodyear welt construction found on those expensive boots to help keep your feet out of the wet. There are no costs cut in the body of this boot. Internally you still get a well-cushioned insole that is quite soft and very comfortable, hour after hour.
If you want a little more, you can take this out and replace it somewhere down the line. The major difference between this boot and one costing more is mostly in the insole. The tread is grippy and oil resistant just as a work boot should be. Your feet are in good hands on slick surfaces and in the muck of those really nasty jobs. These work boots perform as well as any on the market. Check your size on these three-season work boots, they do tend to run a little large, even with the insulation. Complete with a three-month warranty that you will most likely not need. For the money, these are a solid boot that do everything someone needs. Perfect for those who are just starting out in their careers.
“In-shoe foot pressure measurements are significantly lower than the ones measured when walking with the socks only in both diabetic patients and healthy subjects.”
We created the list by inspecting the shoes, looking at their pros and cons and comparing customers’ feedback. Since we are not biased we don’t just look at the brand but the finished product – we base our opinion on how true is the product’s value (in our eyes) considering its’ price, brand and features.
We have carefully picked for you consists of shoes that vary in price and style therefor it is nearly impossible to have everyone agree on the order in which they were presented. As we might not agree on style, the features and price speaks for itself. We do believe that Danner Vicious NMT Work Boot is the best work shoe as far as overall product goes. It might be a bit more expensive, although we believe that every penny spent on this pair is money well spent. We closed our list with Ever Boots Tank Construction Boot and even though it is missing some features such as being fully waterproof or being a bit heavy we believe that it is a great option for the money that you will be spending.
To conclude, we are not saying that a particular shoe will be better than other for you – we believe that it all depends on you and your demographics. For instance, if you live in a hot climate you may not need a shoe that keeps you feet warm and or maybe you just simply don’t care about the weight of the shoe. Either features best reviewed shoes it will most likely have a pair to fit not only your foot but your needs as well. We definitely have listed the top work boots on the market right now.
Some of our research has been based from:
1Pham, Hau, et al. “Screening techniques to identify people at high risk for diabetic foot ulceration: a prospective multicenter trial.” Diabetes care 23.5 (2000): 606-611. 2Sarnow, Marc R., et al. “In-shoe foot pressure measurements in diabetic patients with at-risk feet and in healthy subjects.” Diabetes care 17.9 (1994): 1002-1006.