A fluid extractor is a tool with a reservoir designed to operate a pump to handle big jobs. This device extracts most types of fluid, like gear oil, power steering fluid, engine oil, coolant, and transmission fluid. Using this fluid evacuator is so easy you will find yourself wondering why you spent so much time paying others to get these jobs done, when you could’ve easily done it yourself. Taking good care of your car or any engine will take time. But, you don’t need any specific mechanical skills to do it. For more information read our review guide about the best oil extractor pumps.
The Mityvac 7201 fluid evacuator plus has a huge 2.3 gallon (8.8 liters) bi-functional manual unit to distribute or remove different types of fluids. It is a simple and mess-free tool to use when dispensing and extracting fluids. You can rest assured while using this tool; the reservoir will not corrode or rust. It is made of durable material called polyethylene. This is the type of material that lasts for a very long time.
To add to the ease of use, this product is equipped with flow control which automatically shuts off preventing the tool from filling up. When it reaches 8 liters the flow will automatically shut off.
The main idea of using this product is to avoid making a mess. You can use this tool to do a complete transmission flush, but you have to be patient. To do this, you will need to replace the fluid a couple of times. The fluid will come out bright pink. But, not a single drop will fall on the floor.
If you try to do a transmission flush without a fluid evacuator like this one, you will end up making a huge mess. It won’t be easy to clean. Another bonus point with the Mityvac 7201 fluid evacuator plus is that you won’t need to get dirty since you won’t get under the car unless you have a filter to change.
When you use this tool, it is important to pay attention to the guidelines. The instructions will suggest that you never put combustible or fuel liquid’s inside the Mityvac 7201 fluid evacuator plus. They will not damage the tool, but the vapors that will form could cause potential issues.
It is important to not let the tank contaminate the clean liquid used for dispensing. That is why it is best to use an industrial degreaser. Some people are afraid of cleaning the tank since they believe they can cause a cross-contamination of solvents and chemicals from cleaning products to old fluids. However, you can clean this device. It is time-consuming, but it can be done. To clean your Mityvac 7201 fluid evacuator plus, first take it apart, gently and then clean every single part separately.
The Mityvac 7201 fluid evacuator plus is a very useful tool that doesn’t need to stay in your garage for months on end. Whenever you need to make the first oil change, get this product out. It is very simple to use, especially for those who are still learning the ropes. Here are the steps needed to extract the oil. Of course, you can adjust your process however you see fit, but the steps below are sufficient.
That’s it! The tool will do the rest of the work for you. No mess, no problem. When the level of the container is not increasing or the air starts to gurgle, you will know the job is done.
To deal with the old oil: